Fixing a broken outlet might seem like a job only for professional electricians, but the truth is, there are simple and effective techniques that anyone can learn and apply. With the right tools and a bit of patience, you can repair a broken socket safely and efficiently\u2014without spending money on professional repair services.<\/p>\n
In this article, we will reveal a little-known but extremely useful technique to fix a broken plug. Read on to learn how to tackle this common issue with ease!<\/p>\n
You can also watch the step-by-step instructions in the video on the\u00a0Inova ou inventa<\/strong>\u00a0channel.<\/p>\n <\/p>\n <\/p>\n see continuation on next page<\/strong><\/em><\/p>\n Before you start any repair work,\u00a0make sure to turn off the power<\/strong>\u00a0to the socket you are fixing. This is crucial to avoid accidents and ensure your safety.<\/p>\n Use the\u00a0cutter<\/strong>\u00a0to carefully cut around the broken plug and pry it open. Work slowly to avoid damaging any internal wires.<\/p>\n Use the\u00a0white marker<\/strong>\u00a0to mark each wire according to its position and connection. This step is essential to ensure you reassemble the plug correctly after the repair.<\/p>\n Use\u00a0pliers<\/strong>\u00a0to disconnect the wires from the broken plug. If any wires are damaged, trim off the damaged portion, leaving a clean section to work with.<\/p>\n Use the\u00a0wire cutter<\/strong>\u00a0to strip about 1-2 cm of insulation from the ends of the wires, exposing the inner conductors. Be careful not to cut too many strands of the wire.<\/p>\n Heat up the\u00a0soldering iron<\/strong>\u00a0and apply\u00a0solder<\/strong>\u00a0to the stripped ends of the wires. Then, carefully join the corresponding wires together with the solder, ensuring the connection is tight and secure.<\/p>\n Cut a piece of\u00a0heat shrink tubing<\/strong>\u00a0and slide it over the soldered connection. Use the\u00a0lighter<\/strong>\u00a0to heat the tubing until it shrinks tightly around the solder, providing insulation and protection for the connection.<\/p>\n Once the wires are securely insulated, carefully reassemble the plug. Use\u00a0glue<\/strong>\u00a0(such as \u201cLa Gota\u201d) to fix any loose parts and keep the structure of the plug intact.<\/p>\n Wrap\u00a0electrical tape<\/strong>\u00a0around the connections and any vulnerable areas to ensure extra protection against potential shorts. This will also help keep everything in place.<\/p>\n After reassembling and securing the plug,\u00a0reconnect the power<\/strong>\u00a0and test the socket to make sure it\u2019s working properly. Ensure that the repair was successful and everything is functioning safely.<\/p>\n By following these simple steps, you can fix a broken outlet safely and efficiently, using accessible tools and materials. This technique will help you save time and money while ensuring your plug is as good as new.<\/p>\n With the right preparation and a little patience, you\u2019ll be able to fix most broken plugs yourself, without needing professional help!<\/p>\n <\/center><\/div>\n<\/div>\n <\/center><\/div>\n\n Necessary Materials:<\/h3>\n
\n
Procedure:<\/h3>\n
Procedure:<\/h3>\n
Step 1: Disconnect the Power<\/h4>\n
Step 2: Disassemble the Plug<\/h4>\n
Step 3: Identify and Mark the Cables<\/h4>\n
Step 4: Disconnect the Wires<\/h4>\n
Step 5: Prepare the Cables<\/h4>\n
Step 6: Solder the Wires<\/h4>\n
Step 7: Apply Heat Shrink Tubing<\/h4>\n
Step 8: Reassemble the Plug<\/h4>\n
Step 9: Secure with Electrical Tape<\/h4>\n
Step 10: Test the Socket<\/h4>\n
Conclusion:<\/h3>\n